The 2000 series has a 17” freeboard and is perfect for residential boaters with pontoons, speed boats, and other motorized vessels. Also ideal for commercial applications (marinas, resorts, parks & recreation).
-
Float Section 24″ x 48″
- The 2 x 4 Float Section enables you to add more square footage where a small addition is needed. 48″ x 24″ x 20″ Model FS2024
- Add to Estimate
-
Float Section 48″ x 96″
- The primary component of the Connect-A-Dock system is molded of maintenance-free polyethylene with connector sockets for extendable and straightforward slip-fit connectors. 48″ x 96″ x 20″ Model FS2096
- Add to Estimate
-
Float Section 72″ x 120″
- The FS2120 high profile section is molded of maintenance-free polyethylene with connector sockets for simple, slip-fit connectors. 72″ x 120″ x 20″ Model FS2120
- Add to Estimate
-
Corner Float Section
- Adds strength, stability and extra walking space to the fingers of your dock. 48″ x 67″ x 20″ model CFS2022
- Add to Estimate
-
Extra Flotation
- This accessory adds 300 pounds (136.1 Kg) of extra buoyancy to your 2000 Series Connect-A-Dock wherever additional flotation is required. Extra Flotation should always be placed where gangways are located. model EF2020
- Add to Estimate
-
2000 Series Float Connector
- Float Connectors are used to attach Float Sections or YAKport® Kayak Launch. Hidden from view in slip-fit connector sockets. (Hardware included).
- Add to Estimate
-
Pole Connector
- The versatile Pole Connector slip fits into the exposed connector sockets of Float Sections and can accommodate a variety of anchoring methods, depending on your location and needs. Available in 2" or 3".
- Select Options This product has multiple variants. The options may be chosen on the product page
-
3″ Dual Pole Connector
- Two connection points for added strength. Two Float Connectors required to attach to the dock, order separately. Maximum pole size 3″
- Add to Estimate
-
Finishing Connector 2000
- Give the side walls of your 2000 Series Connect-A-Dock an attractive finished appearance and keep debris out of the connector sockets by filling them with Finishing Connectors. (Hardware included)
- Add to Estimate
-
Accessory Connector 2000
- Add functional and attractive accessories to the outside walls of your dock with the Accessory Connector.
- Add to Estimate
-
Pole Cover
- Pole Cover - 1000/2000 Series (Connect-A-Dock)
- Add to Estimate
-
Connect-A-Dock Swim Ladder
- Provide swimmers easy access in and out of the water with aluminum Swim Ladder. (Hardware included) High and Low profile available.
- Select Options
-
Self-Wicking Planter
- In minutes you can turn your dock into a colorful water front garden. Enjoy your favorite flowers and plants while you relax on your dock.
- Add to Estimate
-
High Profile Bumper
- 2000 Bumper attaches in the float section sockets. 10.6″x 10.6″x 20″ 26.9 cm x 26.9 cm x 51 cm
- Add to Estimate
-
Galvanized Gangway Hinge
- Build and attach your own gangway to your Connect-A-Dock® system using this Galvanized Gangway Hinge. Available in 44" or 56".
- Select Options This product has multiple variants. The options may be chosen on the product page
-
8″ Solar Dock Cleat
- This 8" Solar Cleat from Connect-A-Dock® is used to secure your boat and light up the edge of your dock.
- Add to Estimate
-
2″ Dead Man Collar
- Anchor your dock without poles. Slip the long end of the Dead Man Collar in the Pole Connector on the side of the dock and rig a weighted chain through the bottom of the collar. Fasten the chain by setting a link in the groove in the top of the collar. (Chain and weight not included)
- Add to Estimate
-
Guard Rail 2000 Series
- Guardrails are sturdy and easy to assemble. (2 Accessory Connectors and Hardware included)
- Select Options
-
Gangway Hinge
- Give the side walls of your 2000 Series Connect-A-Dock an attractive finished appearance and keep debris out of the connector sockets by filling them with Finishing Connectors. Stainless Steel. (Hardware included)
- Add to Estimate
